Feltman Brothers Dress In a Window

Feltman Brothers Dress hanging in the window at Woman's Hospital in Baton Rouge

The Gift Shops at Woman's and Baby hospitals have great stuff!

I was taken by how much this style looks like the French Acadian dresses found in my area.

This yoke style is totally like the vintage dresses you find here. 

Feltman Brothers has been making baby clothes for decades.  And while some of the workmanship is still amazing, I was disappointed in the stitching on the dress shown here.  I am just generally sad to see quality decline is so many areas of today's products.

This sleeve has tiny elastic sewn in to gather it which makes it quick and also easy to fit different sized baby arms.

Again the hem is so much like the old baby gowns here!!

Over all, the dress is pretty.  Only on close inspection  - by those who know (us) would you see any problems.

I have old Feltman Daygowns and Dresses handed down that I dressed my baby's in.

I would like to hear from you....do you also have old Feltman Brothers baby clothes in your history??

All Designs Are Copyright Protected copyright 2013 Jeannie Baumeister

Gathering Lace Evenly and Stitching it to Lace Insertion or Entredeux

To assure the lace is gathered evenly, divide the lace in half and also divide the area where the lace will be attached in half.  Then match them up.

Divide the piece of Lace Edging  in half and fasten a small safety pin at the half way point.  A safety pin is easy to see and doesn't move on you! Fasten a safety pin or mark the Lace Insertion or Entredeux at the half way point too.  I am using a French Baby Lace.  It has threads in the Lace Heading to gather.  When you purchase your lace be sure to buy the fine cotton lace (it might have about 10% nylon in it to strengthen it).

To gather lace, pull the very, very, very top thread in the lace heading.  If it doesn't pull easily, try a different thread.
Pull a thread in the lace heading (the straight part of the lace made up of several threads) to gather.  Pull very gently and don't be in a hurry or the thread might break.  If it does break, simply pick up a different thread to gather.

For more control of the gathers, pull up two or  three threads in the lace heading.

When pulling more than one thread to gather lace you must go very slowly.  Because more threads are used to gather it enables the gathers to stay in place much better than when only one thread is used. And because the gathers do not shift so readily, it is easier to attach the gathered   lace to another piece of lace.  It is more difficult to gather with three threads.  Remember to pull the threads gently and slowly.  This is a good method to use on necks and sleeves but it would be most tedious to use on a long piece of lace such as around the hem of the dress.

Stitching Lace Edging To Lace Insertion

Gather the edging to fit the Lace Insertion , matching the half way point of the lace with the half way point of the lace insertion.  If need be, you can divide the lace into quarters for even more assurance that the gathers are even.

I will whip the Lace Edging to the Lace Insertion with right sides together.   In this photo the Insertion has already been stitched to the dress.  The method is the same if the lace is not stitched to the dress - right sides together.

Use a fine needle and thread. I am using an 11 Sharps and a Madeira #80 thread.  Take a stitch through the lace heading of the Edging and Insertion as shown, binding both headings together.  Pull snug with each stitch. Check gathers frequently to make sure they haven't  shifted.  I am stitching the lace right sides together.  And I am stitching from right to left (or top to bottom is shown).

Continue down the length of the Lace Insertion until complete.

When I am done stitching, I will smooth open the lace so that the right side of lace will be facing up, alongside to the lace insertion.  

Stitching Lace To Entredeux

I am trimming away the clipped edge of the entredeux selvage from the neck of this daygown.

Trim away the selvage of the entredeux.

See the little safty pin marking the center of the lace!

Be sure to mark the center of the lace and the entredeux.

A lace board helps because you can pin the entredeux and lace in place as you gather.  You will take it off the board to stitch.

Evenly gather up the lace to fit the entredeux, matching centers.

Position the lace in front of the entredeux and hold together as you stitch.

This Picture shows how it looks as you stitch.

Work from right to left, bringing the needle through each hole of the entredeux and through the lace heading, binding the entredeux and the lace together.

Here you can see how the needle goes through the entredeux and lace.

Top view.

Back View.

Pretty little finished sleeve.

Use the same method to attach Flat Lace Edging to Entredeux.  Just don't gather the lace!

To see more information about stitching Lace to Entredeux go Here.